MVS2620-IP Atom E3950 IP65 Vehicle PC

In stock
SKU
MVS2620-IP
Brand: Nexcom

In-Vehicle IP65-rated Intel Atom x7, 4c, 2.0GHz E3950 9~36VDC with ignition control

Key Features:

  • IP65-rated rugged design
  • Intel Atom x7, 4c, 2.0GHz E3950 (Apollo-lake)
  • 9~36VDC with ignition control
  • Built-in GPS with optional dead reckoning
  • Up to two WLAN or two 3G/LTE via 3 mini-PCIe slots
  • Electrical isolation for CAN 2.0B & GPI/O
  • Optional OBD function (SAE J1939/J1708)
  • Rich and various GbE, USB 2.0, serial I/O and storages
  • Compliant to E-mark and ISO 7637-2
  • Compliant to MIL-STD-810G in vibration/shock
Enquire Now
Enquire about this product:

The MVS 2620-IP, an IP65-rated rugged inclosure, maintenance-free box computer, is ideal for data acquisition in extreme environments in a variety of in-vehicle applications such as transportation, heavy duty, and waste management, among others. For reliable data transmission in harsh and rugged environments, all external interfaces, including Gigabit Ethernet, isolated CAN bus and digit I/O, USB, and RS232/485 serial ports, are implemented on IP67-proof connectors.

 

Key Features:

  • IP65-rated rugged design
  • Intel Atom x7, 4c, 2.0GHz E3950 (Apollo-lake)
  • 9~36VDC with ignition control
  • Built-in GPS with optional dead reckoning
  • Up to two WLAN or two 3G/LTE via 3 mini-PCIe slots
  • Electrical isolation for CAN 2.0B & GPI/O
  • Optional OBD function (SAE J1939/J1708)
  • Rich and various GbE, USB 2.0, serial I/O and storages
  • Compliant to E-mark and ISO 7637-2
  • Compliant to MIL-STD-810G in vibration/shock

 

CPU Intel Atom® x7, 4C, 2.0GHz E3950 (Apollo Lake)
Memory 204-pin DDR3L SO-DMIM socket support 1600MHz up to 8GB, 4GB industrial grade memory in default
Storage 1 x 2.5" SATA 3.0 SSD/HDD 1 x CFast (externally acessible)
GPS and On Board Sensor 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou Optional modules with Dead Reckoning available Built-in G-sensor
Ethernet 2-port 10/100/1000 Mbps Controller: Intel® 1210-T1
Security TPM in option
I/O Interface-Front 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health 1 x USB type A USB 2.0 port (w/ lid) 1 x SIM slot (w/ lid) 1 x Mic-in, 1 x Line-out, power & reset buttons for M12 connector 3 x antenna holes for WWAN/GPS One expansion port (M12-type) reserved
I/O Interface-Rear Circular 22-pin:
- 3x RS-232 (two for full, RI/5V/12V selectable)
M12 8-pin:
- 1 x GbE
M12 8-pin:
- 2 x USB 2.0
M12 12-pin:
- 3-bit GPO & 3-bit GPI
- iButton
M12 12-pin:
- 1 x Line-out
- DC12V-out, 2A max.
- OBD from optional VIOB-CAN-05/06 module (SAE J1708/J1939)
- 2 x CAN Bus 2.0B from optional VIOB-CAN-04 module
Circular 31-pin:
- 1 x VGA, resolution up to 2560 x 1600 @60Hz
- 1 x GbE
- 2 x RS-485 (2-wire)
- 1 x CAN 2.0B w/ isolation
6-bit DIP switch (w/ lid)
3 x Digital inputs
- Source-type: 9~36V-in (default)
-Eexternal-type: 0~33VDC pull-high
-Isolation
3 x Digital outputs
- Source-type: 9~36V-in (norminal 35mA@24V) (default)
- External 5~27VDC pull-high, sink current: typical 220mA for each bit, 500mA max (@25°C)
- Isolation
Source or external selected by 6-bit DIP Switch
1 x SIM card socket (w/ lid) and 1x internal SIM card socket selectable 4 x antenna holes for WLAN/WWAN 1 x M12 S-code for 9~36VDC-IN
Power Management Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode
Operating System Windows 10 64-bit only, Linux YOCTO
Dimensions 260mm (W) x 198mm (D) x 50mm (H) (10.24" x 7.80" x 1.97") 2.88kg
Environment Operating temperatures:
-30°C~70°C (w/ industrial SSD) with air flow
Storage temperatures: -40°C~80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random):
- 1.2g@5~500 Hz (in operation, HDD), 2.5g@5~500 Hz (in operation, SSD)
Vibration (SSD):
- Operating: MIL-STD-810G, 514.6C, Category 4
- Storage: MIL-STD-810G, 514.6, Category 24, minimum integrity test
Shock (SSD/HDD):
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE approval, FCC Class A, E13
pdf
Lock You have to Login or Register to download this file