In stock
Brand: IEI Integration Corp.

Category: Single Board Computers

3.5” SBC with Intel® 22nm Atom™/Celeron® on-board SoC, VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA 3Gb/s, WAFER-BT-i1 mSATA, COM, Audio and RoHS

Enquire Now
Enquire about this product
We build to order



Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W)

Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W)

Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W)

Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W)

Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core, 512KB cache, TDP=5W)

Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W)

Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)

Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W)



BIOS version: AIxx is for Bay-trail I model (CPU: E38xx)

BIOS version: AMxx is for Bay-trail M/D model (CPU: J1900/ N2930/ N2807)

System Memory

One 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815)


LAN1: Intel® I210-AT PCIe controller with NCSI support

LAN2: Intel® I211-AT PCIe controller

I/O Interface

1 x PS/2 KB/MS

2 x SATA 3Gb/s with 5V SATA power connector (no RAID)

1 x USB 3.0 (on rear I/O)

5 x USB 2.0 (1 on rear I/O, 4 by pin header)

1 x RS-422/485 (by pin header)

3 x RS-232 (1 on rear I/O, 2 by pin header)

Digital I/O

8-bit digital I/O (4-bit input, 4-bit output)

Super I/O

Fintek F81866


1 x 4-pin (1x4) wafer


Realtek ALC662 HD codec

1 x Analog audio by 10-pin (2x5) header

Display Interfaces

Dual Independent Display

1 x VGA (Resolution: [email protected])

1 x 24-bit dual-channel LVDS connector ([email protected])

1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to [email protected])


1 x Full-size PCIe Mini card slot with mSATA support (SATA2 and mSATA share SATA signal)

Watchdog Timer

Software programmable, supports 1~255 sec. system reset

Power Supply

12V DC input only (AT/ATX support)

Power Consumption

[email protected] (Intel® Celeron® J1900 CPU, 1 x 8GB 1333 MHz DDR3 memory)


Intel® HD Graphics Gen 7 Engines with 4 execution unit, supports DX11.1, OpenGL 4.2 and OpenCL1.2

Operating Temperature

-20°C ~ 60°C

Storage Temperature

-30°C ~ 70°C


5% ~ 95%, non-condensing


146mm x 102mm


GW:600g / NW:250g

Embedded Controller


Front Panel

1 x 6-pin wafer for power LED & HDD LED

1 x 2-pin wafer for power button

1 x 2-pin wafer for power reset

Fan Connector

1 x 4-pin CPU fan connector

1 x 4-pin system fan connector

iRIS Remote Management Module

1 x iRIS-1010 slot


2 x 2-pin (1x2) header