-
AU-9-DL-1.5M-ASG MIMO CELL + GPS
Multi-band MIMO antenna that supports 2G, 3G & 4G & GNSS applications
Key Features:
- Low profile structure without a whip
- Screw through hole mount
- Support 2G, 3G ,4G & GNSS application bands
- Two LTE antennas to improve the communication performance
-
Dash Mount GPS/GNSS, WiFi + MiMo 4G/3G/2G Antenna
Dash Mount 4G/3G/2G Antenna with optional GPS/GNSS & optional (MiMo) WiFi
-
BL654-USB with smartBASIC
Bluetooth 5 & Thread (802.15.4) - Bluetooth Low Energy (BLE) plus NFC, featuring Nordic nRF52840
-
BT900 - BT4.0 Smart Basic
- Bluetooth v4.0 dual mode (BT and BLE)
- Broad range of hardware interfaces: UART, I2C, SPI, ADC, GPIO
- Tiny footprint (19mm x 12.5mm x 2.5 mm) -
eBOX100-312-FL Pentium N4200 Fanless Embedded PC
Fanless Embedded System with Intel Celeron N3350 & Pentium N4200, 2 HDMI, 2GbE LANs and 6 USB
-
eBOX800-900-FL Rugged IP67 Fanless Edge System with NVIDIA Jetson TX2
Rugged IP67-rated Fanless Edge System with NVIDIA® JETSON™ TX2, 1 HDMI, 1 GbE LAN, 1-CH PoE, 1 USB 2.0 and 100 to 240 VAC Power Input
-
GPSCO-7-27-24-58 Glass Mount LTE/GNSS/Wi-Fi Antenna
Dashboard/Windshield 2G/3G/4G LTE + GPS/GNSS Antenna & WiFi
Key Features:
- Compact Design for Easy Installation
- Can be Mounted on or Under the Vehicle Dashboard
- 3-in-1 Cellular + GPS + WiFi Antenna
- Covers all 2G/3G/4G LTE Bands
- Omni-directional and Ground Plane Independent
- Integrated GPS and WiFi Included
- A Plug-and-Play Solution with no Additional Tuning
- Versatile Product for Multiple Applications
-
HYPER-BT Pico-ITX SBC Atom/Celeron on-board SoC
PICO-ITX SBC supports Intel® 22nm Quad-Core Celeron™ N2930 1.86GHz, J1900 2.0GHz or N2807 1.58GHz
-
HYPER-BW Pico-ITX SBC Pentium/Celeron
Pico-ITX SBC with Intel® Pentium® 14nm quad-core N3710 up to 2.56GHz, x5-E8000 up to 2.00GHz, N3060 up to 2.48GHz or N3160 up to 2.24GHz
-
HYPER-KBN PICO-ITX SBC AMD Embedded G-Series SoCEnd of Life
PICO-ITX SBC with AMD G-Series GX-415GA or GX-210HA SoC processor
-
ICO300-83B DIN-Rail Fanless Embedded System
Intel Celeron Processor N3350 or Pentium Processor N4200, Isolated COM, LAN, and DIO
Key Features:
- Cost-effective with fanless and cableless design
- Intel Celeron processor N3350 or Pentium processor N4200, reliable F1 stepping version CPU
- 4 isolated COM, 4 USB, and 2 GbE LAN
- 8-bit programmable DIO for IoT gateway applications
- Wide operating temperature range from -40°C to +70°C
- 12 to 24 VDC wide range power input
- OVP, UVP, OCP, RPP power protection design
- AMS.AXView intelligent remote monitoring software for IIoT
-
ICO500-518 DIN-Rail Fanless Embedded System
Fanless Embedded System with 7th Gen Intel Core i7/i5/i3 & Celeron Processors, Dual Modular I/O Expansion Design
Key Features:
- 7th gen Intel Core i7/i5/i3 & Celeron processors
- 2 PIM (Plug-in I/O Module) slots
- Fanless and compact design
- Wide operating temperature range from -40°C to +70°C
- 12 to 48 VDC wide range power input
- OVP, UVP, OCP, RPP power protection design
- 1 swappable 2.5" SATA drive tray
-
IRU151-I - i.MX 6UL, Embedded Linux O/SEnd of Life
Robust RISC-based DIN-rail Fanless Embedded System with i.MX 6UL Processor, DIO (2-in/2-out), 4 AI Channels (16-bit, 100 S/s, ±20mA) and 2 PCIe Mini Card Slots
-
IRU152-I - i.MX 6UL, embedded Linux O/SEnd of Life
Robust RISC-based DIN-rail Fanless Embedded System with i.MX 6UL Processor, DIO (2-in/2-out), 4 AI Channels (16-bit, 250 kS/s, 0 - 20mA, ±20mA) and 2 PCIe Mini Card Slots
-
Laird Config Tutorial-Utility
Step by Step guide on how to do basic pairing and testing of 900MHz and 2.4GHz products.
Includes Link to Development Tool Software
-
SDK-AC4x90 Dev Kit
Dev kit for AC4x90 modules. Includes 2 x boards with modules+antennas and cables. Makes development/evaluation easy.