IPGS-5408GSFP - 12 port PoE managed switch

In stock

SKU

IPGS-5408GSFP

- Support IEEE802.3at/af up to 30W per port
- PoE management incl. Detection and Scheduling
- Enhanced G.8032 ring protection < 20ms with easy configuration; Dynamic coupling ring; Aggregation ring*

Downloads:

Product Data Sheet

Enquire Now

Enquire about this product

Name

Phone

Message

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Features

_Standards	_{IEEE 802.3 10Base-T Ethernet} _{IEEE 802.3u 100Base-TX} _{IEEE802.3z Gigabit fiber} _{IEEE802.3x Flow Control and Back Pressure} _{IEEE802.3ad Port trunk with LACP} _{IEEE802.1d Spanning Tree} _{IEEE802.1w Rapid Spanning Tree} _{IEEE802.1s Multiple Spanning Tree} _{IEEE 802.3ad Link Aggregation Control Protocol (LACP)} _{IEEE 802.1AB Link Layer Discovery Protocol (LLDP)} _{IEEE 802.1X User Authentication (Radius)} _{IEEE802.1p Class of Service} _{IEEE802.1Q VLAN Tag} _{IEEE802.3at/af Power over Ethernet}
_{Switch Architecture}	_{Back-plane (Switching Fabric): 24Gbps} _{Packet throughput ability (Full-Duplex): 23.8Mpps @64bytes}
_{Transfer Rate}	_{14,880pps for Ethernet port} _{148,800pps for Fast Ethernet port} _{1,488,000pps for Gigabit Fiber Ethernet port}
_CPU	_{Marvell 800Mhz}
_RAM	_{256M Byte}
_Flash	_{128M Byte}
_{Mac Address}	_{16K MAC address table}
_{Jumbo frame}	_{9KB on all ports}
_Connectors	_{10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function} _{Mini-GBIC: 4 x 1000 SFP socket with DDM} _{RS-232 connector: RJ-45 type} _{USB for configuration restore/backup} _{Power & P-Fail connector: 1 x 6-pole terminal block} _{DIDO : 1 x 6-pole terminal block}
_{Network Cable}	_{10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable} _{EIA/TIA-568 100-ohm (100m)} _{100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable} _{EIA/TIA-568 100-ohm (100m)} _{1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable} _{EIA/TIA-568 100-ohm (100m)}
_{Optical Cable}	_1.25Gbps: _{Multi mode: 0 to 550 m, 850 nm (50/125 μm); 0 to 2 km, 1310 nm (50/125 μm)} _{Single mode: 0 to 10 km/ 30 km/ 40 km, 1310 nm (9/125 μm); 0 to 50 km/ 60 km/ 80km/ 120 km, 1550 nm (9/125 μm)} _{WDM 1.25Gbps:} _{Single mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1310 nm (9/125 μm); 0 to 80 km, 1490 nm (9/125 μm); 0 to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm)}
_Protocol	_CSMA/CD
_LED	_{Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red)} _{Ethernet port: Link/Activity (Green), Speed (Green); Mini-GBIC: Link/Activity (Green)}
_DI/DO	_{2 Digital Input (DI) :} _{Level 0: -30~2V / Level 1: 10~30V} _{Max. input current:8mA} _{2 Digital Output(DO): Open collector to 40 VDC, 200mA}
_{Operating Humidity}	_{5% ~ 95% (Non-condensing)}
_{Operating Temperature}	_{-20°C~60°C / -4°F~140°F (Standard model)} _{-40°C~75°C / -40°F~167°F(-E model)}
_{Storage Temperature}	_{-40°C~85°C / -40°F~185°F}
_{Power Supply}	_48VDC
_{PoE Budget}	_{240W for 45~56V input} _{(55V input is recommended for 802.3at 30W applications)}
_{PoE pin assignment}	_{RJ-45 port # 1~#8 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides 30W PoE at/ 15W PoE af.} _{Positive (VCC+): RJ-45 pin 1,2.} _{Negative (VCC-): RJ-45 pin 3,6.}
_{Power Consumption}	_10W
_{Case Dimension}	_{Metal case. IP-30,} _{Standard model: 74 (W) x 114 (D) x 152 (H) mm} _{-E model: 96.3(W) x 114 (D) x 152 (H) mm}
_Weight	_{900 g}
_Installation	_{DIN Rail and Wall Mount** Design}
_{EMI & EMS}	_{FCC Class A,} _{CE EN61000-6-2, CE EN61000-6-4, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE N61000-4-8, EN61000-4-11}
_{Stability Testing}	_{IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),} _{IEC60068-2-6 (Vibration)}
_MTBF	_{274,919 hrs}
_Warranty	_{5 years}

IPGS-5408GSFP - 12 port PoE managed switch

Downloads:

Standards

Switch Architecture

Back-plane (Switching Fabric): 24Gbps Packet throughput ability (Full-Duplex): 23.8Mpps @64bytes

Transfer Rate

14,880pps for Ethernet port 148,800pps for Fast Ethernet port 1,488,000pps for Gigabit Fiber Ethernet port

CPU

Marvell 800Mhz

RAM

256M Byte

Flash

128M Byte

Mac Address

16K MAC address table

Jumbo frame

9KB on all ports

Connectors

10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function Mini-GBIC: 4 x 1000 SFP socket with DDM RS-232 connector: RJ-45 type USB for configuration restore/backup Power & P-Fail connector: 1 x 6-pole terminal block DIDO : 1 x 6-pole terminal block

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m) 1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m)

Optical Cable

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red) Ethernet port: Link/Activity (Green), Speed (Green); Mini-GBIC: Link/Activity (Green)

DI/DO

2 Digital Input (DI) : Level 0: -30~2V / Level 1: 10~30V Max. input current:8mA 2 Digital Output(DO): Open collector to 40 VDC, 200mA

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-20°C~60°C / -4°F~140°F (Standard model)-40°C~75°C / -40°F~167°F(-E model)

Storage Temperature

-40°C~85°C / -40°F~185°F

Power Supply

48VDC

PoE Budget

240W for 45~56V input (55V input is recommended for 802.3at 30W applications)

PoE pin assignment

RJ-45 port # 1~#8 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides 30W PoE at/ 15W PoE af. Positive (VCC+): RJ-45 pin 1,2. Negative (VCC-): RJ-45 pin 3,6.

Power Consumption

10W

Case Dimension

Metal case. IP-30, Standard model: 74 (W) x 114 (D) x 152 (H) mm -E model: 96.3(W) x 114 (D) x 152 (H) mm

Weight

900 g

Installation

DIN Rail and Wall Mount** Design

EMI & EMS

FCC Class A, CE EN61000-6-2, CE EN61000-6-4, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE N61000-4-8, EN61000-4-11

Stability Testing

IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

MTBF

274,919 hrs

Warranty

5 years

_Standards

_{Switch Architecture}

_{Back-plane (Switching Fabric): 24Gbps}
_{Packet throughput ability (Full-Duplex): 23.8Mpps @64bytes}

_{Transfer Rate}

_{14,880pps for Ethernet port}
_{148,800pps for Fast Ethernet port}
_{1,488,000pps for Gigabit Fiber Ethernet port}

_CPU

_{Marvell 800Mhz}

_RAM

_{256M Byte}

_Flash

_{128M Byte}

_{Mac Address}

_{16K MAC address table}

_{Jumbo frame}

_{9KB on all ports}

_Connectors

_{10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function}
_{Mini-GBIC: 4 x 1000 SFP socket with DDM}
_{RS-232 connector: RJ-45 type}
_{USB for configuration restore/backup}
_{Power & P-Fail connector: 1 x 6-pole terminal block}
_{DIDO : 1 x 6-pole terminal block}

_{Network Cable}

_{10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable}
_{EIA/TIA-568 100-ohm (100m)}
_{100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable}
_{EIA/TIA-568 100-ohm (100m)}
_{1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable}
_{EIA/TIA-568 100-ohm (100m)}

_{Optical Cable}

_Protocol

_CSMA/CD

_LED

_{Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red)}
_{Ethernet port: Link/Activity (Green), Speed (Green); Mini-GBIC: Link/Activity (Green)}

_DI/DO

_{2 Digital Input (DI) :}
_{Level 0: -30~2V / Level 1: 10~30V}
_{Max. input current:8mA}
_{2 Digital Output(DO): Open collector to 40 VDC, 200mA}

_{Operating Humidity}

_{5% ~ 95% (Non-condensing)}

_{Operating Temperature}

_{-20°C~60°C / -4°F~140°F (Standard model)}
_{-40°C~75°C / -40°F~167°F(-E model)}

_{Storage Temperature}

_{-40°C~85°C / -40°F~185°F}

_{Power Supply}

_48VDC

_{PoE Budget}

_{240W for 45~56V input}
_{(55V input is recommended for 802.3at 30W applications)}

_{PoE pin assignment}

_{RJ-45 port # 1~#8 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides 30W PoE at/ 15W PoE af.}
_{Positive (VCC+): RJ-45 pin 1,2.}
_{Negative (VCC-): RJ-45 pin 3,6.}

_{Power Consumption}

_10W

_{Case Dimension}

_{Metal case. IP-30,}
_{Standard model: 74 (W) x 114 (D) x 152 (H) mm}
_{-E model: 96.3(W) x 114 (D) x 152 (H) mm}

_Weight

_{900 g}

_Installation

_{DIN Rail and Wall Mount** Design}

_{EMI & EMS}

_{FCC Class A,}
_{CE EN61000-6-2, CE EN61000-6-4, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE N61000-4-8, EN61000-4-11}

_{Stability Testing}

_{IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),}
_{IEC60068-2-6 (Vibration)}

_MTBF

_{274,919 hrs}

_Warranty

_{5 years}