ELT0215I UM982 M.2 Dual-Antenna RTK GNSS Receiver
calcActive())">
New
Unicore
SKU:
ELT0215I-USB-N
Dual-antenna RTK GNSS receiver for embedded positioning and heading, using the Unicore UM982 and a M.2 3030 Key E host slot.
Key Features
- Unicore UM982 supports multi-frequency RTK positioning and dual-antenna heading.
- M.2 3030 Key E form factor with a USB interface to the host.
- Two IPEX antenna inputs for compatible 3.0 V active GNSS antennas.
- Rated to operate from −40°C to +85°C.
Description
Product Overview
ELT0215I is an embedded RTK GNSS receiver for industrial and mobile systems that need accurate positioning and heading. It uses the Unicore UM982 module and has two antenna inputs so the receiver can calculate heading from the antenna baseline. The M.2 3030 Key E board integrates into a compatible host computer via USB.
Key Features
Multi-frequency RTK positioning
- Receives GPS, Galileo, GLONASS, BeiDou and QZSS signals.
- Supports RTCM 3.x differential data and NMEA 0183 or Unicore output.
- The receiver supports base, rover and heading operation.
Dual-antenna heading
- Two IPEX inputs let the receiver measure heading from a pair of GNSS antennas.
- Use compatible antennas designed for a 3.0 V supply.
- Antenna placement and baseline are part of the system design.
Embedded integration
- Fits a compatible M.2 3030 Key E slot with USB routed to the connector.
- Check the host’s pinout and interface before ordering.
- Status LEDs indicate power, time pulse, position and RTK status.
- The board includes a backup supercapacitor.
Industrial operating range
- Specified for −40°C to +85°C operation and −55°C to +95°C storage.
- The board is supplied assembled and ready for integration.
Applications and Use Cases
- Vehicle positioning and heading
- Industrial navigation and mobile mapping
- Precision agriculture and field equipment
- Embedded RTK bases and rovers
More Information
| Brand | Unicore | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Specifications |
|
Ordering Information
| ELT0215I-USB-N | M.2 3030 Key E; USB only; GNSS power-down on USB suspend disabled. |
|---|---|
| Other configurations | USB suspend power-down is a separate option. Enquire about USB + UART + RESET availability for 1.8 V hosts. |
Need something specific?
We build to order.
We can customise any solutions according to your specifications. Click below to learn more
and contact us.